AMC CVT3030 Petunjuk Pemasangan dan Pengoperasian Manual - Halaman 3
Jelajahi secara online atau unduh pdf Petunjuk Pemasangan dan Pengoperasian Manual untuk Penguat AMC CVT3030. AMC CVT3030 11 halaman. Valve amplifier
Juga untuk AMC CVT3030: Panduan Servis (16 halaman)
Halaman Cetak
INTRODUCTION
The AMC CVT 3030 has been designed to give
superb sound quality and represents
outstanding value for money.
The CVT 3030 is a hybrid mosfet valve design,
capable of giving superb sound reproduction.
The components are all of the highest quality, but
there are a few simple hints to follow in order to
get the best from your new amplifier.
1) 00 not stand any object or other component
on the top. Whilst the 3030 is one of the
coolest running Class A valve amps avallable,
uninterrupted air flow is most important.
2) There are two silent fans in the base under
each pair of EL34 valves. Again, the air space
under the amp must not be restricted in any
way.
Never stand the unit on a carpeted
surface or anything soft, or on another
component which generates heat.
3) The amplifier will sound best when it is
'warmed up', this can take 15-20 minutes
avoid operating the PHONES/NORMAL/
OIRECT switch during this period.
4) The valves should last a very lang time but can
be changed easily.
However, as there is
always same voltage present inside, even
when the unit is turned off, we recommend
that this is carried out by your AMC dealer, it
is only a five minute job for an engineer.
5) We recommend you retain the original carton
and packaging so that it can be repacked
correctly if it ever becomes necessary to
transport the unit or return for service.
6) After switching off, always let the amplifier cool
down before turning on again.
2
INSTAlLATION
Your AMC amplifier is supplied set to work on
your local malns supply voltage.
Check that
your local mains supply voltage agrees with the
voltage setting indicated on the back panel of the
amplifier. If not, please contact your dealer or
national distributor for details on how to proceed
further.
The cores of the mains lead are coloured in
accordance with the following code:
Blue
- Neutral
Brown
- Live
Note: Export units for certain markets have
moulded mains plugs fitted as standard .
As the colours in the mains lead may not
correspond with the coloured markings
identifying the terminals in your plug, proceed as
fallows:
The wire which is coloured blue must be
connected to the terminal which is marked by the
letter N, or coloured black or blue. The wire
which is coloured brown must be connected to
the terminal which is marked by the letter L, or
coloured red or brown.
FUSES
If the mains plug is fused, fit a 3amp fuse.
Your AMC amplifier contains fuses which are
designed to protect the amplifier and prevent the
occurrence of a dangeraus fault condition.
These should only be inspected and replaced by
a competent engineer using the correct
replacement types.