AMC XOi Panduan Petunjuk Pemasangan dan Pengoperasian - Halaman 13

Jelajahi secara online atau unduh pdf Panduan Petunjuk Pemasangan dan Pengoperasian untuk Penguat AMC XOi. AMC XOi 16 halaman. 8 zone 8 source audio digital home system; 4 zone 4 source audio digital home system; 6 zone 8 source audio / video digital home system
Juga untuk AMC XOi: Manual (9 halaman)

Halaman Cetak

7. Using the Link Jack to create Eight Zones

Two XOi can be made to react as one using the back-panel 3.5mm connection

labeled "Link". This requires the use of "Y" cables to link the source inputs and IR

outputs. A single mono mini-patch cable is then plugged into the "Link" jack on both

XOi. This links the All Off command so when it is initiated at any of the zone

keypads, all eight zones will turn off.

8. Mute Input and the AMC PDM1 (Phone-Doorbell-Mute Module)

(This is an optional feature)

The back panel of the XOi has a 3.5mm non-shorting stereo connector input labeled

"Mute". This is designed to be used with the AMC PDM1 Phone-Doorbell-Mute

module. When the PDM1 is connected, the system will temporarily mute when the

phone or doorbell rings.

Front

1,2 Doorbell

(This is an optional feature)

The back of PDM1 will accept up to two AC or DC voltages from two different

doorbell chimes.

This connection is done with two conductor wire from the terminals on the doorbell

chime to the Doorbell A or Doorbell B inputs on the back of the PDM1, Polarity is

not important for this connection.

3. RJ-11 Connection

Up to two phone lines can be brought into the RJ-11 connection on the back.

The voltage from the phone ringer will trigger the XOi System to mute.

AMC PDM1 (Phone-Doorbell-Mute Module)

(This is an optional feature)

Rear