AMC iLive 2x2 Panduan Pengguna - Halaman 7

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Sistem mikrofon AMC iLive 2x2. AMC iLive 2x2 16 halaman.

Receiver operation

SYNC BUTTON

Press this button to transmit data from receiver to transmitter in order to synchronize microphone or

body pack transmitter and receiver.

NAVIGATION BUTTONS

These buttons are designed to navigate receivers menu and adjust settings.

SET BUTTON

Short press of this button shows number of current channel for two seconds on LCD screen if channel

frequency are displayed for default and otherwise, shows the channel frequency if channel number are

set for display default. Long press brings menu on the screen, in order to enter the submenu press SET

button one more time. Use navigation buttons to navigate menu or adjust settings.

LCD DISPLAY

Displays the current settings, menu and other information, like RF level, AF level, volume, frequency or

channel, lock status, mute status and which antenna A or B is active at the moment.

IR TRANSMITER

IR transmitter allows synchronize microphone or body pack and receiver by establishing handheld

microphone or body pack radio frequency to the same as the receiver.

POWER SWITCH

Press power switch for 3 seconds to turn on/off the power.

ANTENNA CONNECTOR

This connector designed to connect antenna to the receiver.

XLR AUDIO OUTPUT

Balanced XLR audio output.

MIXED AUDIO OUTPUT

Unbalanced audio output, 6.3mm TS jack connector. Audio signal in this output is mixed from both

receivers.

MAIN POWER CONNECTOR

Connector for DC 12 V – 16 V 1.25A power supply.

LCD DISPLAY

Displays the current frequency, channel and transmitter's battery level.

IR RECEIVER

IR receiver allows synchronizing microphone and receiver by establishing handheld microphone radio

frequency to the same as set in receiver.

POWER BUTTON

Press power button for 3 seconds to turn on/off the power.

BATTERY HOLDER

Battery holder for two pieces of AA sizes alkaline batteries. Pay attention to battery polarity, wrong

polarity can damage transmitter!

BATTERY COVER

Remove battery cover in order to insert or replays batteries.