AMCI SD7540A Panduan Pengguna - Halaman 3

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Unit Kontrol AMCI SD7540A. AMCI SD7540A 16 halaman.

ADV ANC ED

MIC RO CON T RO L S INC.

The AMCI SD7540A Stepper Drive

Features

Compact Design – 2.2"X2.6" footprint

Optimized drive design

Industry standard Step/Direction control signals

More torque at higher speeds than competitive designs

Wide range of operating voltages, 24-75Vdc

Speeds to 2000 RPM

Anti-resonance circuitry

Motion controlled by Step & Direction input signals

Easy to use configuration software

Uses standard RS232 interface for programming

Programmable motor current

Programmable Idle Current Reduction

400, 1000, 2000, or 5000 selectable step resolution

AMCI quality and reliability

Single power supply

The SD7540A uses step and direction control signals generated from an external source such as

AMCI's 3202 or 3601 stepper control modules. A logical diagram of the inputs is shown below.

The SD7540A is powered by an external DC supply with an operating range of 24 to 75Vdc. There

is an additional control input that can be used to disable the motor. This input can be left floating if

you are not using the disable motor feature.

20 Gear Drive, Plymouth Industrial Park, Terryville, CT 06786

Tel: (860) 585-1254

Fax: (860) 584-1973

CW Rotation

STEP

DIR

Web: www.amci.com

SD7540A Stepper Drive

The SD7540A is a powerful stepper motor

drive in a low cost, compact package.

Externally powered from a 24 – 75 VDC power

supply, this drive pack can operate up to

NEMA size 34 motors.

With up to 4 Amps rms(5.66 Amps peak) of

half step and microstepping capabilities, this

drive pack provides higher speed and torque

than any other drive in its class. Yet, it is easy

to connect to any differential or transistor

pulse and direction motion controller signal

CCW Rotation

page: 3