AMCI SMD23 Series Panduan Pengguna - Halaman 11
Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Unit Kontrol AMCI SMD23 Series. AMCI SMD23 Series 14 halaman. Integrated stepper drive & motor
Halaman Cetak
ADV ANC ED
MIC RO CON T RO L S INC.
Changing the SMD23 Configuration Settings (continued)
Procedure: (continued)
6. Select the Port menu and choose the COM port that the cable is connected to:
7. Turn on the power supply to the drive.
8. Press the Connect button. For a few seconds the TX and the RX lights can change
their color to green to inform that the program is establishing the communication.
Once they settle to red, the communication is established. The current settings of the
drive will be displayed (RESOLUTION, IDLE and CURRENT), together with the
identification of the Drive. The motor will be disabled until the next power up.
For example:
The firmware
version
Status
display
9. If a change to a setting is required, the new setting is selected from the appropriate
field.
By pressing the Defaults button, the default settings will appear:
• RESOLUTION: 2000 steps/revolution
• IDLE: 20% (Motor Current when motor is idle)
• CURRENT: 80% (Operating Current)
20 Gear Drive, Plymouth Industrial Park, Terryville, CT 06786
Tel: (860) 585-1254
Fax: (860) 584-1973
SMD-23 Integrated Stepper Drive & Motor
Web: www.amci.com
page: 11