AMCOL 6000-ETC Panduan Operator - Halaman 8

Jelajahi secara online atau unduh pdf Panduan Operator untuk Pengontrol AMCOL 6000-ETC. AMCOL 6000-ETC 11 halaman. Electronic timing controller

Automatic Actuation

To automatically use the 6000E system, it should be

interfaced with a PLC or machine output, which

should be wired into the ETC. When the PLC or

machine output is on, the ETC will activate both

solenoids on the 6000E automatically. The Dispersing

Air Solenoid (SV1) will remain on as long as the output

is on, and the Injection Pulse Rate Solenoid (SV2) will

pulse at the set rate displayed on the ETC.

While running automatically, the spray volume and pattern should be consistent.

No misting or fogging should be present. See the 6000E Operator's Manual for

troubleshooting spray output issues.

P a g e | 7

6000-ETC Operator's Manual