Float Plus Compact 2 Panduan Pengguna - Halaman 4

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Peralatan Perahu Float Plus Compact 2. Float Plus Compact 2 12 halaman.

Compact 2

• Connecting the waterproof case:

Connecting the motor:

Connect the motor plug to the motor connection on the side of the case. Make sure that the nut on the

plug is always screwed straight and firmly (hand tight) onto the thread of the plug.

Connecting the kill switch:

Insert the V-shaped hook of the safety cord under the red emergency switch button. This lifts the red

button and activates the motor control.

CAUTION: The system will not work if the hook is not positioned correctly under the red button.

• Connecting the battery:

A cable FP20101 with two rings is

supplied as standard for a battery.

A Float Plus battery requires a cable

with two waterproof connectors

(FP20102).

WARNING:

All cases are IP66 water resistant.

This means that no water penetration can occur if sprayed (100L/min) at

any angle.

NEVER USE THE CASES IN OR UNDER WATER!

• IP66 Waterproof Float Plus batteries:

FP 17023

12,6V 20800mAh

Motor control case

Battery case

Kill switch

Battery connection

Peripheral device connection

FP 17024

12,6V 41600mAh

Motor connection

FP 20101

FP 17025

16,8V 31200mAh

FP 20102