Floater DF169 Panduan Pengguna - Halaman 5

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Pendingin Udara Floater DF169. Floater DF169 13 halaman. Eco air cooler, evaporative air cooler with ionizer

Halaman Cetak

CONTROL PANEL OPERATION

ON/SPEED BUTTON:

On/Speed button is used for starting the unit and changing the wind speed.

Wind speed is started from medium speed and changed to low speed 3 seconds

later, then you can press the On/Speed button to set the speed you need. Wind

speed is divided into HIGH, MEDIUM and LOW by indicator lights.

COOLER/HUMIDIFIER BUTTON:

If the Cooler/Humidifier function is not on, the ECO AIR COOLER acts like any

normal fan, without the evaporative cooling.

When the Cooler/Humidifier button is selected, the water pump is engaged.

After a couple of minutes, the evaporative cooling process will begin.

This function will only operate when there is at least the minimum re-

quired amount of water in the water tank. If the Cooler/Humidifier button

is pressed and there is not enough water in the tank or if the water level

falls below the minimum, a warning sound will emit from the unit for 10

seconds, and the Cooler/Humidifier function will automatically shut off -

this is for the protection of the water pump.

TROUBLESHOOTING TIP

If the Cooler/Humidifier function automatically shuts off even though there

is enough water in the tank, the float switch that protects the water pump

is stuck. When the float switch is stuck, the unit acts as if there is no water in

the tank. In order to dislodge the float switch, please drain the unit of wa-

ter and ensure that it is dry. Grab the handles on the sides of the unit and

shake the unit from side to side and up and down vigorously. This will reset

the float switch and the Cooler/Humidifier function will work properly.