AMCON CD-7810 Panduan Instruksi Pengguna - Halaman 2

Jelajahi secara online atau unduh pdf Panduan Instruksi Pengguna untuk Pembersih Perhiasan Ultrasonik AMCON CD-7810. AMCON CD-7810 2 halaman. Digital ultrasonic cleaner

Halaman Cetak

The item should be immerged well into the water.

However, do not exceed the "MAX-" mark.

Close the lid, and pl u g in.

Press "SET" button, the 5 optional working cycles from It is

the most common-used working cycle. Every time when the

unit is electrified, 180s is displayed automatically,

Press "SET" button to choose working cycle freely.

180s

280s

380s

480s

90s

will be displayed on the screen. Users can choose working

cycle freely according to the quantity and situation of the item.

The unit adopts digital program to control working cycles.

Press"ON"button to start cleaning and the red indication

light is on. The time left will be displayed on the screen.

During cleaning, you can hear the "ZIZI" voice, it means

the unit is working normally.

When reach the time of

the unit will auto stop, the red light

will turn off. If another cleaning is needed, just repeat the above

steps. During cleaning, if you want to stop, just press "OFF"

button. Press "ON" button again, the unit will implement the

7 6

remainder program to continue the cleaning. Furthermore, you

can press "SET" button to renew working cycle.

When cleaning finished, unplug it and open the lid, then take

out the item. At last, pour water from stainless steel tank and

7 7

wipe it up.

High frequency vibration stimulates the

transducer and generates 42,000Hz of

ultrasonic wave. Fill-in with plain

water submerge the item to be cleaned,

then press"ON" button. You will see the dirt

separates off into the water.

SPECIFICATIONS:

1.Digital program;5 working

cycles; choose freely.

2.Stainless steel tank.

3.Tank capacity: 750ml---1.3pint

4.Ultrasonic frequency: 42,000Hz

5.Quiet, solid state circuitry.

READ ALL INSTRUCTIONS BEFORE USING

KEEP THIS MANUAL