Amcor AMB12KE410A Buku Petunjuk - Halaman 5

Jelajahi secara online atau unduh pdf Buku Petunjuk untuk Pendingin Udara Amcor AMB12KE410A. Amcor AMB12KE410A 12 halaman. Portable

Installation

This unit is a portable air conditioner. It can be moved from room to room so that

the cooling can follow you anywhere. Fitting the exhaust hose is easy, through a

window or wall. Please refer to either of the following ways:

• Open the window.

• Moisten the suction cups from the window

fitting kit (18) and press firmly onto a clean

window to secure.

• Place the connector (13) into the hole in the

foam (12) with the flange outside.

• Screw the end of the hose (11) into the

fitting (13).

• Place the assembled foam strip between the

open window and pull the windows so that

they close onto the foam.

• Depress the button on the toggle and pull

the cord until it is taught.

• Release the button to enable the cord to

hold the foam in place.

• Connect the hose to the back of the unit

with the adapter (10).

• Pass the hose through the opening in the

foam (12)

• Make a hole in the wall/glass large enough

to fit the supplied round connector (13) with

the flange on the inside.

• Fit the hose (11) directly to the round

connector.

• When the hose is not in use, place the cap

(14) to cover the hole.

Important

The supplied flexible exhaust hose can be extended from 300 to 1500 mm for

locating. It is recommended that you use the shortest possible length of the hose.

This length has been designed especially according to the specifications of the air

conditioner. Do not replace or extend it with your own hoses as this could cause

the unit to malfunctioning.

The exhaust air must flow freely, any blockage can lead to overheating of the air

conditioner. Take care to prevent any kink or bend in the middle of the exhaust

hose, as this will trap hot exhaust air, which will radiate into the room.