Floe PONTOON CRADLE PADS Manual Petunjuk Perakitan - Halaman 13

Jelajahi secara online atau unduh pdf Manual Petunjuk Perakitan untuk Peralatan Perahu Floe PONTOON CRADLE PADS. Floe PONTOON CRADLE PADS 16 halaman.

FOLLOW THESE GUIDELINES FOR USING AND LOCATING THE PONTOON CRADLE PAD BUNKS (FIGURE

2.10).

-THE WIDTH OF THE CRADLE PAD BUNKS SHOULD KEEP THE PONTOONS OFF THE CRADLE BEAMS.

-THE BUNKS SHOULD BE KEPT AS LOW AS POSSIBLE (NOT QUITE TOUCHING THE CLAMP).

-TO PLACE CRADLE PAD BUNKS, FIND CENTER BETWEEN PONTOONS AND CENTER OF THE BOAT FROM

PONTOONS AND TRANSLATE MEASUREMENT TO CRADLE BEAM TO DETERMINE CENTER OF EACH PAIR

OF CRADLE PAD BUNKS. LOCATE MIDDLE CRADLE PAD BUNKS AROUND CENTER OF CRADLE BEAM.

-THE REAR OF A 21' PONTOON BOAT SHOULD OVERHAND PAST THE LIFT BY 3 FEET. FOR EVERY

ADDITIONAL FOOT IN LENGTH OF THE BOAT, IT SHOULD OVERHANG BY AN ADDITIONAL 6 INCHES

BEYOND THE REAR OF THE LIFT. THESE ARE GENERAL GUIDELINES THAT CAN BE ADJUSTED FOR AN

INDIVIDUAL'S CIRCUMSTANCES.

-ONCE BUNKS ARE IN THEIR FINAL LOCATION, TORQUE 3/8" NUTS ON CRADLE CLAMPS TO 35 FT-LBS

AND 5/8" NUTS ON CRADLE CLAMPS TO 70 FT-LBS (FIGURE 2.10).

FIGURE 2.10

SHEET 13 OF 16