Floe 6500 Manual Petunjuk Perakitan - Halaman 6

Jelajahi secara online atau unduh pdf Manual Petunjuk Perakitan untuk Sistem Pengangkatan Floe 6500. Floe 6500 8 halaman. 24 volt vsd drive

steP 4 - - - - - - - - - - - - - - - - - - - - - - - - - - -

Connect the two remaining wires coming out of the Advanced Switch Control (ASC) box to the batteries. The two wires on the

Advanced Switch Control have ring connectors. One ring connector is red and the other is black and red. Connect these wires using

the diagram (Fig. 4A). Connect the red wire to the positive post on the second battery and the black/red wire to the negative post

on the first battery. Connect the Battery Interconnect cable between the two batteries use the diagram (Fig. 4A) as a reference. Also

at this time attach the Battery Volt Meter leads (red to Positive and black to negative) of each battery. Example (Fig. 4B). Place the

diagnostic Check List in the battery box for future reference. Replace the battery box covers and secure them with the strap.

BATTERY #1

to Electronic Control Box

Fig. 4A

Battery Interconnect wire

BLACK connector

Page 6 of 8

RED connector

BATTERY #2

Fig. 4B