Flomatic Maxiair Petunjuk Instalasi - Halaman 2

Jelajahi secara online atau unduh pdf Petunjuk Instalasi untuk Unit Kontrol Flomatic Maxiair. Flomatic Maxiair 2 halaman. 1/2” thru 6” air release valves

Halaman Cetak

Air Release Valves

Model Maxiair® ½" thru 6"

OUTLET

Item

Interference Pin

Problem:

Leaks when closed

Leaking at inlet connection

Leaking around the cover

Information needed to order repair parts:

Valve Model Number

Valve Size

Valve working Pressure

Limited One Year Warranty: Flomatic valves are guaranteed against defects of material or workmanship when used

for the services recommended. If, in any recommended service a defect develops due to material or workmanship, and

the device is returned, freight prepaid, to Flomatic Corporation within 12 months from date of purchase, it will be

repaired or replaced free of charge. Flomatic Corporations' liability shall be limited to our agreement to repair or

replacement of valve only.

INLET

Description

Top

Flange

Body

Gasket

Seat

Float

Bolt

Nut

Trouble Shooting Guide

Flomatic Corp, 15 Pruyn's Island, Glens Falls, New York 12801

Phone: 518-761-9797

Installation Instructions

1. Inspect seat for wear or damage and replace if

needed.

2. If valve is more the 5 years old replace seat.

3. Inspect the float for damage and replace if needed.

If float is damaged contact factory to review possible

sizing or position problems.

Tighten valve connection. If valve still leaks remove

valve from system and re-attach with new Teflon tape

or liquid Teflon.

Tighten bolts

Fax: 518-761-9798

www.flomatic.com

Flomatic Corporation

Possible Solutions:

maxiair

Rev. D