Amcrest IPM-751 Panduan Memulai Cepat - Halaman 8

Jelajahi secara online atau unduh pdf Panduan Memulai Cepat untuk Kamera IP Amcrest IPM-751. Amcrest IPM-751 15 halaman.

SETTING UP YOUR CAMERA

ETHERNET WIFI

SETUP

Pick a WiFi network, enter in the

password, then tap "Next".

Note:

Most Amcrest cameras can only

connect to 2.4 GHz WiFi networks, so

please ensure that your phone is

connected to a compatible network.

Tap the "Start Live Preview"

button to proceed with changing

your password.

To ensure the security of your camera, you will

be asked to change the password for your

camera's default username (admin). Please select

a password that is at least 8 characters long and

one that uses a combination of uppercase letters,

lowercase letters, and numbers. Note that once

the password is changed here it will take effect

immediately. If you forget your password, you

can always hard reset the camera using the steps

detailed in the Troubleshooting section of this

guide.

Your camera is now ready to go! Unplug the

camera from Ethernet and power, then relocate

the camera to anywhere within range of the

WiFi network that you connected the camera

to. Plug in the camera, then wait 1-2 minutes

before tapping the "Start Live Preview" button.

For additional assistance, please contact us at

www.amcrest.com or give us a call at 1-888-212-7538.

Step-by-step video tutorials available at