AMDEK VIDEO 310A Panduan Pemilik - Halaman 4

Jelajahi secara online atau unduh pdf Panduan Pemilik untuk Monitor AMDEK VIDEO 310A. AMDEK VIDEO 310A 7 halaman. 12" video monitor

OPERATION:

1. Connect the signal cable from your monitor to the TTL l/P (9 PIN "D"

TYPE) connector in the back of the personal computer. (Refer to l/P

connector layout)

2. Connect the power cord with specified outlet, and pull the PULL ON switch

to set the unit on. It will be a few seconds before the picture comes on

to the screen.

3 Adjust the CONTRAST and BRIGHTNESS controls to make the picture at

the level most pleasing to your eyes.

4. To adjust the picture

to the center of the screen, use

H-CENTER

for

horizontal adjustment, and V-HOLD for vertical adjustment.

CAUTIONS:

1. Do not use or store this monitor in a place with much moisture or dust,

or high ten:iperature such as kitchen appliances, direct sunshine, etc.

2. Do not cover the ventilation slits while in operation. This will prevent the

necessary ventilation.

3. When

the

screen surface filter develops dusts, clean with soft cloth

moistened with

water.

Special cleaning cloth is also available from your

local dealer.

4. When the monitor is not in use for a long time, be sure to pull the power

plug out of the outlet.