101VOICE IP3667 Panduan Instalasi Cepat - Halaman 7

Jelajahi secara online atau unduh pdf Panduan Instalasi Cepat untuk Pengontrol Akses IP 101VOICE IP3667. 101VOICE IP3667 13 halaman. Ip door access control
Juga untuk 101VOICE IP3667: Panduan Pengguna Cepat (2 halaman)

Halaman Cetak

IP3667

3. Installation

Front

Step 1: Installation preparation

A. Check the following contents:

 Hex wrench x 1

 RJ45 plugs x 2 (1 spare)

 TA5 x 40mm screws x 4

 35mm screw anchors x4

B. Tools that may be required:

 Hex wrench

 Phillips screwdriver (Ph2 or Ph3), hammer, RJ45 crimper

 Electric impact drill with an 6mm drill bit

Step 2: Drilling

A. Place the mounting template with dimensions on the surface of a wall in the desired flat position.

B. Use an electric drill to drill the 4 holes marked on the mounting template. It is recommended to drill

about 50mm deep. Remove the template when finished drilling.

C. Push or hammer screw anchors into the drilled holes.

Panel Main Part of Intercom

Figure 1 Three Major Parts of IP3667

Figure 2 Wall Mounting

Rain Shade

Back Panel