CO2 Meter eSENSE Outdoor SE-0036 Panduan Instalasi - Halaman 5
Jelajahi secara online atau unduh pdf Panduan Instalasi untuk Alat Ukur CO2 Meter eSENSE Outdoor SE-0036. CO2 Meter eSENSE Outdoor SE-0036 7 halaman. Co2 transmitter with heater and inline thermostat mounted in ip65 housing
Halaman Cetak
+
~
+
~
Figure 1 Picture of the PCB with the jumper for setting Out(2) to current output (left
position) or voltage output (right position)
Electrical connections
The power supply must connected to
ground. The same ground reference has to be used for the eSENSE unit and for the
DDC/signal receiver.
PLEASE NOTE! The same ground reference has to be used for
the eSENSE unit and for the control system!
Connection
Function
Terminal
Power (+)
~
+
Power ground (-)
Out(1)
Analogue Output 1 (+)
Out(2)
Analogue Output 2 (+)
Table I. Electrical terminal connections for
Current
Voltage
~
+
and
.
is considered as system
Electrical Data
24 VAC/DC+
(+-20%), 2W
24 VAC/DC-
0-10 VDC
0-2000 ppm CO
2,0-10,0 VDC or
0-2000 ppm CO
4,0-20,0 mA
Status = ERROR
0,9-1,6 VDC or
1,5-2,5 mA
0 VDC or 0mA
Status = NOT READY
eSENSE
Remarks
2
2
5