CO2 Meter SAN-0001 Manual - Halaman 11
Jelajahi secara online atau unduh pdf Manual untuk Alat Ukur CO2 Meter SAN-0001. CO2 Meter SAN-0001 19 halaman. Pocket co2 monitor & data logger
Halaman Cetak
Installing the Software
Double click or select Run from the popup menu to launch the GasDataLogging executable
program as shown in Figure 1.
Figure 1：GasDataLogging Software
IMPORTANT: THE
FTD2XX.DLL
FILE IS REQUIRED TO CONNECT THE MONITOR VIA USB. IT MUST
BE IN THE SAME FOLDER AS THE GASDATALOGGING EXECUTABLE PROGRAM.
Connecting the Monitor
Once the software is successfully installed, you can connect the monitor using the provided USB
data cable. Your software is now ready to use.
Main Screen Overview
The GasDataLogging interface has various sections and buttons that you should familiarize
yourself with before using the software. A brief description of each section is shown below.
Figure 2：GasDataLogging Main Screen
Meter Select
The Meter Select section is located on the top left area of the GasDataLogging main screen, as
shown in Figure 2. Each meter's COM port is automatically assigned when it is connected to your
PC through USB cable. Click on the COM number to select the monitor you want to connect. Then
click the Connect Meter button to communicate with your CO2 monitor.
11