10Bar E-500 Panduan Pengguna - Halaman 7

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Aksesori Kamera 10Bar E-500. 10Bar E-500 12 halaman. Camera housing

(Fig. 5)

(Fig. 7)

(Fig. 9)

Replace the lid (Fig. 10). Remember to ensure the pressure release plug is pulled all

the way out while closing, otherwise the air cannot escape. Squeeze the lid closed all the way

with the hissing of expelled air. Screw home the pressure release plug. There is no need to

excessively tighten this plug. The seal is made by internal O-rings. The O-ring on the

underside of the plug is just to keep out dirt.

After replacing the lid, make a final visual inspection of the main O-ring for

contamination (Fig. 11).

(Fig. 6)

(Fig. 8)

(Fig. 10)

9/6/2006