Coalesse Lox 5-Star Base Chair Arah Perakitan Layanan Pelanggan - Halaman 6
Jelajahi secara online atau unduh pdf Arah Perakitan Layanan Pelanggan untuk Perabotan Dalam Ruangan Coalesse Lox 5-Star Base Chair. Coalesse Lox 5-Star Base Chair 6 halaman.
Halaman Cetak
Replace Base
1.
Carefully lay chair on it's side on a scratch resistant surface.
2.
Using a mallet, remove old base and install new base.
3.
Carefully place chair in its upright position.
NOTE: Sit in finished chair to make sure there is a good
connection between the taper of the cylinder & base.
Replace Glides
1.
Carefully lay chair on it's side on a scratch resistant surface.
2.
Place a flat-bladed screwdriver through the opening in the
glide cap retainer to snap off the glide caps (2a). Unscrew the
glide cap retainer from the leg (2b).
3.
Reverse steps to install new glide.
(4-STAR BASE)
2a
2b
2
Replace Casters
1.
Position the chair on it's side on a clean soft surface.
2.
To remove casters: Pull outwards on the casters
while tapping the base with a plastic mallet.
3.
Insert the new casters or glides into the base and
tap them in with a plastic mallet.
(5-STAR BASE)
CASTER
Page 6 of 6
939500684 Rev B