Coastal MYGIG LOCKPICK PRO Panduan Petunjuk Pemasangan dan Pengoperasian - Halaman 5
Jelajahi secara online atau unduh pdf Panduan Petunjuk Pemasangan dan Pengoperasian untuk Aksesori Mobil Coastal MYGIG LOCKPICK PRO. Coastal MYGIG LOCKPICK PRO 15 halaman. Adapter for chrysler/dodge/jeep
Halaman Cetak
The MYGIG LOCKPICK PRO ADAPTER is designed with a simple "T" harness connector, equipped
with factory male and female connectors for converting the present system to the new
antenna adapter cable included to allow your older style antenna to plug into the new Mygig radio.
Most installations are relatively simple with just a single panel surrounding the radio which must be
pulled free to expose your present radio. Remove 4 screws holding the radio and unplug the connections on
the rear of the radio. Plug in your adapter harness and module inline with your new radio and you are ready
to go. Consult a professional installer if you require assistance plugging in your Lockpick.
ITEMS NEEDED FOR INSTALLATION:
SUPPLIED - Lockpick adapter module, Lockpick adapter harness, FM antenna adapter harness
CUSTOMER SUPPLIED – MYGIG radio, Sirius Sat antenna (if desired).
-
If installing a navigation ready Mygig radio you will need the navigation GPS antenna and
microphone for voice recognition and Uconnect phone operation. These are generally included in
aftermarket purchases or may be ordered from your local dealer.
1.
With access to the rear of the
Lockpick adapter harness. Then plug in the Lockpick harness to the matching connectors on the rear of
the Mygig radio you are installing. The connectors are keyed and cannot be plugged in to the wrong
location. Line up the connectors carefully and make sure that no pins are bent or misaligned before
pressing hard to make sure the connector is fully seated.
2.
If your original factory radio system included a smaller 10 pin
the MYGIG radio, it is wired for different functions not used in the MYGIG radio.
3.
Plug in your FM antenna adapter
will plug into the present factory antenna connector.
screen, unplug the existing radio and plug the factory connectors into the
to the White terminal on the back of the MYGIG and the other end
one. Also, an FM
connector, disregard it. Although it will fit