Coastal Electronic GMX550 LOCKPICK Panduan Instalasi - Halaman 5

Jelajahi secara online atau unduh pdf Panduan Instalasi untuk Sistem Navigasi Mobil Coastal Electronic GMX550 LOCKPICK. Coastal Electronic GMX550 LOCKPICK 10 halaman.

Halaman Cetak

The text will remain on your instrument panel for approximately 10 seconds after your last Lockpick

operation. You may turn it off immediately by pressing the MUTE button 4x. When activated, the

Lockpick text will always return to last function allowing quick operation for frequently used options.

A complete list of text and options for the GMX550 are listed below:

GMX550 LOCKPICK

SCROLL FOR MENUS

NAV IN MOTION

PRESS > TO TURN ON

DVD IN MOTION

PRESS > TO TURN ON

ACTIVATE IPOD

PRESS > TO TURN ON

ACTIVATE AUX A/V

PRESS > TO TURN ON

VIEW REAR CAM

PRESS > TO TURN ON

VIEW FRONT CAM

PRESS > TO TURN ON

VIEW LEFT CAM

PRESS > TO TURN ON

VIEW RIGHT CAM

PRESS > TO TURN ON

HEADREST OUT

OPTIONS PRESS >

HROUT SCRN

SELECTED

Initial display on instrument panel. Press steering

wheel ▲ and ▼to view primary menus.

NAV input override will automatically time out after 60

seconds when activated.

DVD override activation has no time limit. You can

turn it off manually or it will reset to off when the car

is taken out of Drive or turned off.

Automatically places the radio in the XM mode and

activates audio + IPOD text on screen. If IPOD video is

selected, picture is viewed on radio screen

Automatically places the radio in the XM mode and

activates audio + AUX A/V text on screen. If AUX

video is selected, picture is viewed on radio screen

Activates Rear camera (factory or aftermarket). Camera

must be powered by the GMX550 for this function. See

installation options. (step 3)

Activates Front camera if installed. Camera must be

Activates Left camera if installed. Camera must be

Activates Right camera if installed. Camera must be

Set different options for video and audio outputs to

external screens or headrest inputs.

(Default) Indicates that headrest output is

selected to copy the Audio/Video sent to the

front screen.