aero pure AP80-QVL Panduan Instalasi - Halaman 2

Jelajahi secara online atau unduh pdf Panduan Instalasi untuk Kipas angin aero pure AP80-QVL. aero pure AP80-QVL 4 halaman. Recessed fan light
Juga untuk aero pure AP80-QVL: Panduan Instalasi (13 halaman)

Halaman Cetak

PLAN THE INSTALLATION

1. Do not use in a cooking area.

2. Two ways to connect ductwork to a factory-shipped unit

ASSEMBLY INSTRUCTIONS

1. Before installation, you need to know:

1. MOUNT WITH HANGER BARS

1a. Sliding hanger bars have been provided, which allow the housing to

be positioned accurately anywhere between the framing. The bars may be

used on all types of framing: I-joist, standard joist,

and truss construction. Slide hanger bars onto housing and adjust as

needed to fit between framing.

1b. Extend the hanger bars to the width of the framing. Position the

fan with the hanger bar tabs aligned with the bottom edge of the framing,

holding the ventilator in place.

Secure hanger bars to framing using one screw on each end of hanger bar.

Attach set screws to lock bar hangers in place.

2. INSTALL ROUND DUCTWORK

Connect the round ductwork (not included) to the damper/duct connector,

and run the ductwork to a roof or wall cap (not included). Using duct tape

(not included), secure all the ductwork connections so that they are air

tight. Insulated flexible duct is recommended for the quietest possible

installation. If rigid duct is used, a short (1-3 feet) section of insulated

flexible duct will ensure quiet operation

READ AND SAVE THESE INSTRUCTIONS

Installer: Leave this manual with the homeowner

AP80-QVL, AP80H-QVL