aero pure AP80H-QVL Panduan Instalasi - Halaman 3

Jelajahi secara online atau unduh pdf Panduan Instalasi untuk Kipas angin aero pure AP80H-QVL. aero pure AP80H-QVL 4 halaman. Recessed fan light
Juga untuk aero pure AP80H-QVL: Panduan Instalasi (13 halaman)

Halaman Cetak

CONNECT ELECTRICAL WIRING

Run 120 Volts AC house wiring to the fan. Use only UL-approved connectors (not included) to attach the house wiring to the

wiring plate. Refer to the wiring diagram, and connect the wires as shown.

AP80-QVL

AP80H-QVL

FINISH CEILING WORK

1. A round ceiling hole 6 1/2 inches (165mm) diameter should be cut.

Seal any gap between the hole in the drywall and the fan with sealant .

2. Install the the compact florescent bulb or LED bulb. Bulb not included.

3.The bulb housing can adjust up or down to accommodate different

bulbs.Unit is qualified with use of GU24 adaptor and use of a GU24 bulb.

REPLACEMENT INSTA LLATION

1. Remove the trim ring by detaching the springs.

2. Remove the screws as shown in the right.

3. Remove the lamp base.

4. Pull the duct system, so that you can see the blower system.

REPLACEMENT INSTALLATION

5. Remove the screws as shown in the right.

6. Remove the blower system from of the housing.

7. Replace the broken parts.

READ AND SAVE THESE INSTRUCTIONS

Installer: Leave this manual with the homeowner

AP80-QVL, AP80H-QVL