Acre Aperio AH40 Manual - Halaman 11

Jelajahi secara online atau unduh pdf Manual untuk Beralih Acre Aperio AH40. Acre Aperio AH40 19 halaman. Wireless hub

Aperio Integration

6. Right-Click on the Hub Row and

Select Communication Hub>Configure if

the window is not already open and Click

on the ACU Settings Change Button.

The ACU Settings Window will open.

Type In the ACU or Controller IP Address

as well as Verify that the ACU Port is 3561

and Check the Enable TLS box.

7. Click OK.

We will now continue the installation

by adding the Aperio® AH40 Hub as a

Subcontroller in DNA Fusion

Adding the AH40 Hub to DNA Fusion

Once the initial hardware configuration has been completed, you will now need to add it to your access

control system. For the purpose of this guide, we will be using DNA Fusion. To start, you will need to Log

In to DNA Fusion using your Username and Password. Once in you will need to Open your Hardware tree

and Locate the Controller that was used for the ACU Address in Step 6 on this page.

1. Right-Click on the Controller who's address was used in the ACU Step. Select Add>Add

Subcontroller... A new window will appear.

2. Type In the Description for the AH40 in its respective line (Name of the AH40 location or reference

name). Click on the Drop Down under Type/Preview and Select the Aperio® IP Hub. Type in the IP

Address used for the Hub in the IP Addr: line. Click OK.

Integration Guide

Page 8