Aktakom APS-7306 Panduan Pengguna - Halaman 11

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Catu Daya Aktakom APS-7306. Aktakom APS-7306 12 halaman. Programmable dc power supply

The Measurement box shows the current state of the device -

switching on outputs, output voltage and current, stabilization mode

- by voltage or current.

Remarks

The APS-7306 device in the basic configuration has some features of

operation:

- there is no command to turn off remote operation

- to switch to local control, turn off and then turn on the power

supply of the device.

- display of the current parameters on the screen of the device may

not coincide with the readings of the program in the absence of a

load connected to the device

4. Service

4.1 Terms of Use

Supply and input voltages, storage and operating temperatures in

accordance with the general section of technical data.

• Relative humidity not more than 90% at 25°C.

• Atmospheric pressure from 495 to 795 mm.

• Storage and operation rooms must be free of dust, acid vapors,

alkalis, and corrosive gases.

• Do not drop or vibrate.

• After staying under extreme conditions (storage, transportation),

the exposure time of the device in normal (operational) conditions is

at least 2 hours.