aero-naut Foxx Manual - Halaman 16
Jelajahi secara online atau unduh pdf Manual untuk Mainan aero-naut Foxx. aero-naut Foxx 20 halaman. Pylon racer
Halaman Cetak
27
With soft pencil mark ailerons on trailing edge: aileron cut-outs start 50 mm
from centre line of wing. They are 210 mm long and 18 mm deep.
Cut out ailerons with modeller´s knife and razor saw.
F 20
28
Bevel off front edge of ailerons to provide for sufficient
control throw.
Cut slots for control horns F 20 into ailerons and glue
control horns in place.
Attention:
If you use Z-bends on both ends of control
linkage, glue control horns in place after ailerons have been
attched to wing!