Aktakom ACT-1012 Panduan Pengguna - Halaman 2

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Peralatan Uji Aktakom ACT-1012. Aktakom ACT-1012 4 halaman. Cable and line tracker

Halaman Cetak
Page 1 of 3
1. INTRODUCTION:
The Cable Tracker is designed to identify and trace wires or cables within a group without damaging the
insulation. For telephone line it can identify some state in the line and more convenience to install,
debug, and maintain telephone line.
2. FUNCTIONS:
1.
Judge continuity of the cables or wires.
2.
Track the cables or wires, and diagnose the break point.
3.
Receiver the tone signal on the cables or wires (telephone line).
4.
Identify the state in the working telephone line (clear, ring, busy).
5.
Send a single solid tone or a dual alternating tone to the object cables or wires.
3. OPERATION INSTRUCTIONS
Test CONTINUITY:
1. Use the sender (switch to "CONT"):
Connect the test leads to the subject pair. Use "CONT" position. The bright green of "CO NT" indicator
indicates the continuity. (Line resist
WWW.TMATLANTIC.COM