Acer AL718 Panduan Pengguna - Halaman 3
Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Monitor Acer AL718. Acer AL718 8 halaman. Acer monitor user's guide
Juga untuk Acer AL718: Panduan Servis (44 halaman)
Halaman Cetak
Adjusting the Viewing Angle
The viewing angle of the monitor ranges from 0°~20°.
Caution: Make sure that the computer and the monitor are both disconnected
from the power supply.
Connecting the Devices
Power Code
Attach the monitor to the power cord which should then be
inserted into a properly grounded electric socket.
Audio cable
Connect the audio input socket of the LCD monitor and the
computer by means of the audio cable.
VGA Cable
Connect the signal cable to the VGA output socket of the
(Attached)
graphics card on the computer. Then tighten the
thumbscrews on the connector.
WARNING: The D-Sub 15 pin plug of the VGA cable is trapezoid in shape. Make
sure the shape of the plug matches the shape of the socket it is inserted
into, and that none of the pins are bent or otherwise damaged.
Switching the Power
First, switch the power on to the monitor, then switch the power on to the computer.
When you see the LED on the power button go green, this indicates the computer is
ready for use. Allow about 10 seconds for the video signal to appear. If you do not see
the green light on the power button or a video signal, check the connections.
3