Acer CB382CUR Panduan Pengguna - Halaman 25
Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Monitor Acer CB382CUR. Acer CB382CUR 33 halaman.

Note: Adjusts the balance between light and dark shades.
6.
Contrast: Adjust the contrast from 0 to 100.
-----------------------------------------------------------------------------------------------------------
Note: Sets the degree of difference between light and dark areas.
7.
Black Boost: Adjust the black level from 0 to 10. Enhances shadows by increasing the
brightness without changing lighter shades.
8.
Blue Light: Filters out blue light to protect your eyes by adjusting how much blue light is
shown -- 80%, 70%, 60%, or 50%.
-----------------------------------------------------------------------------------------------------------
Note: Higher values allow more blue light through. For the best protection select
a lower value.
9.
ACM: Turn ACM on or off. The default is off.
10. HDR: Can control Off and Auto, the default is Off, set to Auto will automatically detect
and deal with HDR signal.
-----------------------------------------------------------------------------------------------------------
Note:
1. When HDR = Auto, the Modes will also be automatically set to "HDR".
2. When HDR = "Auto", some parameters (ACM, Gamma, Contrast, Blue Light,
Black Boost) function is gray out and disable, and if you change other adjustable
parameters, the "Modes" will not jump to "User" Mode.
11. Super Sharpness: Turn the Super Sharpness On or Off. Super Sharpness technology
can simulate high-resolution images by boosting the pixel density of the original source
to make images sharper and clearer.
Color
Mode - User
Picture
Gamma
Color
Colour Temp
Audio
R Gain
Performance
G Gain
OSD
B Gain
System
R Bias
G Bias
B Bias
Save setting to...
Move
Enter
Mode - User
Picture
Modes
Color Space
Color
Grayscale Mode
Audio
6-axis Hue
Performance
6-axis Saturate
OSD
System
Save setting to...
Move
Enter
1.
Press the MENU key to open the OSD.
2.2
User
50
50
50
X
50
50
50
Off
Off
X