Aktobis WDH-H3 Panduan Pengoperasian - Halaman 6

Jelajahi secara online atau unduh pdf Panduan Pengoperasian untuk Pembersih Udara Aktobis WDH-H3. Aktobis WDH-H3 12 halaman.

Note: The following key

indicated by the symbol (lock) in the timer field. To cancel the child lock, keep the button pressed for 3 seconds or

disconnect the appliance from the power supply for a short time.

3.) Preparation and installation of the filters

The air purifier is equipped with all filters from the factory. First open the front filter compartment door. Now remove

all the filters. Remove the protective cover from the fine filters and then push the filters back into their drawers in

the correct order. When inserting the filters, make sure that they are inserted the right way round. For the combi-

filter (HEPA + activated charcoal filter) we recommend that the white HEPA side faces to the right so that the air

flows through the HEPA filter first and only then through the activated charcoal filter. Finally, close the front filter

compartment door again properly, otherwise the air purifier cannot be operated.

See the charts below:

Ion operation can be activated (deactivated) by pressing the symbol

There are three (3) different fan strengths, press the following button for this:

Level 1

> Weak fan strength

Level 2

> Average fan strength

Level 3

> High fan power

When the

symbol lights up, automatic air sensor operation has been activated

You can select thefollowing (remaining) running times of the air purifier by repeatedly

1 h / 2 h / 4 h / 8 h / 12 h

After this time has elapsed, the air purifier switches off automatically. If the setting 00h has

been selected, the unit runs in endless mode.

can be used to activate the child lock of the appliance. Activation of the child lock is

Aktobis AG, Borsigstr. 20, D-63110 Rodgau / Germany

www.AKTOBIS.de

Anion exchanger / ion operation

Display of the fan speed

Time switch (timer)

pressing the timer button: