American Sanders OBS-18DC Petunjuk Keselamatan Operator - Halaman 3

Jelajahi secara online atau unduh pdf Petunjuk Keselamatan Operator untuk Sander American Sanders OBS-18DC. American Sanders OBS-18DC 7 halaman.

Machine Setup

To prepare the machine for use follow this procedure:

1. Familiarize yourself with the machine. Read all

danger, warning, and caution statements and the

Operation and Parts Manual before operating the

machine. If you or the operator are unable to read

English, have this manual fully explained before

attempting to operate this machine.

2. Install or replace pad. The pad should be replaced

if it has become matted down to a thickness of 3/

8" or less. To install or replace the pad, follow

these instructions:

a.) Lock handle in the upright position.

b.) Tilt the machine back until it fully rests on the

handle.

c.) Standing over the machine, remove existing

pad then center new pad over grip face.

d.) Press pad against grip face until the hooks in

the driver have set in the pad. See figure 3.

e.) Return machine to the upright position.

CAUTION:

Damage to the grip face will occur if

the machine is operated without a pad

or with a pad that is 3/8" or thinner.

WARNING: Never put yourself or let others be in

a position to get injured if the

machine should tip or fall, while

replacing the pad or changing

abrasive.

Clarke

American Sanders

Operator's Manual (EN) - OBS-18/18DC

ENGLISH

Figure # 3

- 5 -