Akura AHH20LCD Panduan Pengguna - Halaman 18

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk TV LCD Akura AHH20LCD. Akura AHH20LCD 19 halaman. 20” lcd tv / monitor

Battery installation and replacement for remote control unit

The remote control uses two 1.5V AA batteries. For battery installation and replacement are as following:

Turn the remote control unit upside down. Press

down the grip of battery compartment and slide

the cover in the direction of the arrow.

Install two new batteries, make sure that

battery polarity matches with the "+", "–"

marks inside the battery. Or it could

damage the unit.

3. Close the battery compartment covers

Disposal of used batteries. Do not break open or throw

in a fire exhausted batteries. Dispose of in a safe manner

8 Trouble Shooting

Before calling the Customer Help Line please carry out these simple tests

Problems

No picture or sound.

Picture is OK, no sound.

Remote control doesn't work. Check if the power switch is in "on" position.

No TV signal.

Check if the power supply is plugged in.

Check if the power switch is in "on'" position.

Check if the volume control is set to the minimum or mute position.

Check if the batteries are worn out or not connected.

Make sure that there is no strong light striking the sensor window

of remote control unit.

Check there are no obstacles between the sensor window and

remote control unit.

Check if the TV/AV button is set to TV status.

Check