Akura AHLTV15 Buku Petunjuk - Halaman 13
Jelajahi secara online atau unduh pdf Buku Petunjuk untuk TV LCD Akura AHLTV15. Akura AHLTV15 16 halaman. 15.4″, (15.25”viewable) lcd-tv
Halaman Cetak
Manual Tuning.
If you need to add another station or signal from a Tv game or other source, rather than "Autosearch" you may
manually add another station. Ensure the additional apparatus is connected and turned on.
1.
Press the Menu button 3 times to select the TV Menu.
2.
Select CHANNEL and using the
location.
3.
Press the
button until the MANUAL SEARCH text is highlighted.
4.
Press the
button. To see the menu opposite.
5.
Use the
/
button to select UP or DOWN
6.
Press the
button to start searching
7.
The Tv will search from the point selected. If the signal is not seen
press the
/
buttons to select the opposite direction and the
again.
8.
When the required signal is seen, exit the menu by pressing "EXIT" or "MENU"
Note : If using a Tv game or similar, it is wise to have no other connection to the aerial connector as this may
confuse the situation.
Swap.
When AUTO SEARCH was done, the Tv stations would not be in the correct order, thus BBC1 would not be in
location 1. To place the stations into the correct order :-
1.
Press the MENU button 3 times to select the TV Menu
2.
Press the
button until SWAP text is highlighted.
3.
Press the
button to select FROM
4.
Using either the
Note :- it is useful to have a current Tv guide to hand.
5.
Press the
button to select TO
6.
Using either the
7.
Press the
button to select SWAP.
8.
Press the
, the Tv will now place BBC1 into location 1, however the Tv will now display what was inI the
OLD location.
9.
Press the
button again to return to the SWAP menu and continue until all the programmes are in the
correct order (BBC1, BBC2, ITV, CH4, ITV5).
To exit the menu press EXIT or MENU.
Skip.
When Auto Search is completed there may be unwanted stations seen, these may be noisy or poor pictures from
other signal areas. You cannot delete these, however they may be "hidden" using the SKIP function.
1.
Press the MENU button 3 times to select the TV Menu
2.
Select CHANNEL and press the
3.
Press the
button until SKIP text is highlighted.
4.
Press the
button to turn SKIP on.
5.
To SKIP other channels repeat 2 to 4.
6.
To Un Skip any channel repeat 2 to 4 as
You may select any "Skipped" channel using the Numeric buttons.
PC –RGB Operation
This TV provides excellent pictures when used as a PC VGA Monitor. Connect the LCD TV to the Computer as
shown on page 8. This connection should be done with both the PC and LCD Tv in the Off state.
Turn on the LCD Tv and PC. Select PC-RGB using the AV/TV button on the Remote control or INPUT button on
the Tv. When the PC has "booted" the display should be bright and clear. If this is not the case, enter the PC Menu
by pressing the Menu button once. Select the "AUTO CONFIG" item and press
shudder for a few seconds and will then settle to an optimum setting.
If you require other adjustments, re enter the menu and adjust to your requirements.
If you need a sound connection, this should be done whilst the PC and TV are turned off.
or
buttons to select a free
or
buttons or Numeric buttons locate BBC1
or
buttons or Numeric buttons select (1)
or
buttons or Numeric buttons select the unwanted channel
also turns "Skip Off"
.
Page 12
button
. The display will shake and