American Sportworks 5210 208cc FUN KART Panduan Pemilik - Halaman 8

Jelajahi secara online atau unduh pdf Panduan Pemilik untuk Kendaraan Offroad American Sportworks 5210 208cc FUN KART. American Sportworks 5210 208cc FUN KART 12 halaman.

maintenance
REPLACEMENT PARTS AND SERVICE
Most replacement parts are typically available from your dealer. Because of immediate availability and convenience, it is recommended that replacement
parts be ordered from an authorized dealer. Take this manual and all supplements to the dealer when ordering parts in person.
If replacement parts are not available from a dealer, they may be ordered directly from American Sportworks by contacting ASW at 1-800-643-7332 or
online at www.amsportworks.com. Orders may be subject to a minimum fee. A listing of authorized service center locations in your area is also available
from our Customer Service department.
Record the Vehicle Identification Number (VIN) in the spaces provided at the front of this manual. The VIN can be found on the crossbar, behind the seat.
SERVICE & GENERAL MAINTENANCE
A. Engine Service
NOTE: For engine service, maintenance, and general information, please refer to the LCT Engines Operation Manual.
B. Cleaning Instructions
Keep your kart clean by using a clean rag and a mild detergent and water solution. Wipe off all dirt and oil from around the controls. Wipe off any spilled
fuel and oil. Keep the engine clean and clear of foreign objects, especially those around the air intake fan and air inlet ductwork.
C. Chain Lubrication and Adjustment
For optimum chain life, lubrication with a spray on chain lubricant should be performed on a regular basis. DO NOT USE OTHER OILS.
fig. C1
A new chain will stretch within the first few hours of use and therefore will require adjustment. The first chain adjustment should be made after the first 2
hours of use. If the chain has more than ½" of slack or "flex" then it will require adjustment.
To adjust:
1) Loosen Nut (1).
2) Adjust nut (2) until the proper chain tension is achieved.
3) Re-tighten Nut (1).
15362R1 rev. A
pub. 05/19/2015
SECTION 3
(see fig. C1)
ADJUSTMENT
5210 OWNERS MANUAL
3/8" -1/2"
NUT 2
NUT 1
5