American Standard 1660 Petunjuk Instalasi - Halaman 3
Jelajahi secara online atau unduh pdf Petunjuk Instalasi untuk Produk Pipa American Standard 1660. American Standard 1660 3 halaman. Shower systems multifunctional rain showerhead
Juga untuk American Standard 1660: Daftar Bagian (1 halaman), Spesifikasi (2 halaman), Spesifikasi (2 halaman)
Halaman Cetak
3
INSTALL BODY SPRAY
Remove the PLASTER GUARD (1) if not already removed.
Make sure the O-RING (2) and FLANGE GASKET (6) are installed on the BODY SPRAY (3). Thread BODY SPRAY (3)
into the ELBOW (4).
Tighten BODY SPRAY (3) using WRENCH (5) supplied until flush against finished wall and FLANGE GASKET (6) is
compressed. Turn on water supply and test installed BODY SPRAY (3) for leaks and proper operation.
6
4
INSTALL ESCUTCHEON
Align ribs on back of ESCUTCHEON (1, 2), with slots in BODY SPRAY (3). Push ESCUTCHEON (1, 2) against BODY
SPRAY (3) until ESCUTCHEON (1, 2) snaps into place.
Turn on water supply and test installed BODY SPRAY (3) for leaks and proper operation.
BACK OF ESCUTCHEON
5
CARE:
DO: SIMPLY RINSE THE PRODUCT CLEAN WITH CLEAR WATER. DRY WITH A SOFT COTTON FLANNEL CLOTH.
DO NOT: DO NOT CLEAN THE PRODUCT WITH SOAPS, ACID, POLISH, ABRASIVES, HARSH CLEANERS, OR A
CLOTH WITH A COARSE SURFACE.
2
3
5
ALIGNMENT RIBS ON
SLOTS
3
2
1
4
1
5
FINISHED WALL
FINISHED WALL
1
2
3
6
ALIGNMENT RIBS ON
BACK OF ESCUTCHEON
2
4
M 9 6 8 6 17 R ev. 1. 2