Euro Towers EURO 500 Buku Petunjuk - Halaman 4

Jelajahi secara online atau unduh pdf Buku Petunjuk untuk Peralatan Konstruksi Euro Towers EURO 500. Euro Towers EURO 500 6 halaman.

EURO 500 DOUBLE WIDTH ASSEMBLY GUIDE

1. Insert the castors into the adjustable legs.

Insert 2 legs and castors into each 2 rung

frame.

5. Add 4 diagonal braces from the 1

to 3

and 3

to 5

rungs as shown, level the tower

using a spirit level as a guide.

2. Fit one horizontal brace on the plain side

of the frames to the vertical of the frames

above the 1

rung connecting the 2 frames

together.

Fit the 4 stabilizers supplied with your

tower. Note:

Always fit 4 stabilizers unless

building in a corner, inner stabilizers fit

parallel to a wall. See kit list for correct size

required to build your tower.

3. Fit another horizontal brace on the ladder

side of the frames face down onto the 1

rung. Note:

when standing inside the frames

looking at the ladder frame, the ladder should

be to the left hand side.

7. Fit a trapdoor platform to the 4

rung,

trapdoor to the ladder end. Note:

Platforms

are positioned every 4 rungs.

4. Fit the next set of frames onto the base,

ladder frames run continuously up the left

hand side. Note:

see kitting page for frame

8. Climb the ladder inside the tower and sitting

through the trapdoor fit 4 horizontal braces

face down onto the 1

and 2

rung above the

platform to form your guardrails, as shown.