12trace GeoChaser Control Panduan Pengguna - Halaman 3

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk GPS 12trace GeoChaser Control. 12trace GeoChaser Control 7 halaman.
Juga untuk 12trace GeoChaser Control: Panduan Pengguna (8 halaman), Manual (9 halaman)

12trace GeoChaser Control Panduan Pengguna
To activate your account you will receive an e-mail from [email protected] at the e-
mail address you specified, follow the instructions in this e-mail. Your account and
GeoControle are now activated.
Note: The GeoControle is equipped with a SIM card. You cannot change the PIN code of
the SIM card. It is not possible to insert a different SIM card, this leads to device failure.
4.2 Existing user
If you already have a 12Trace account, you can add the GeoControle to your account.
Log in to your account with the "log in" button and then click on "Add GeoControl", and
enter the requested information. Your GeoControle is now activated.
5. Placing your GeoControl
For the optimal functioning of your GPS tracking system, it is important that the
GeoControl is NOT completely enclosed by metal or metal-containing glass. This may
seriously disturb or even prevent the operation of the system. In general, plastic and
tinted glass are no obstacle to receiving a GPS signal. The GPS antenna and GSM
antenna is built into the GeoControle, but also an external antenna for both GPS and
GSM are available in the webshop. The GeoControle has mounting holes on both sides
for mounting.
LED
led status
GSM
fast flashing
flash slowly
GPS
off
flash slowly
fast flashing
on
PWR
off
flash slowly
fast flashing
on
6. Extra connections
Connector connections can be connected according to the table below.
6.1 Digitale Input
There is a general digital input on input 8, 10 and 12 and are white in color.
This input can be e.g. use for a panic button or a floatsensor. Input 12 has an
interrupt input and can be used for an alarm input. The other inputs only give
status.
6.2 Analogue Inputs
The Green wires are the analogue inputs. This can measure a DC voltage of 0 to 2.7V.
Engels V1.7
Device status
Network search
Connected
GPS off
No data
GPS search
Found position
No external power
connection
External power low
Charge the battery
Battery full
Pagina 3 van 7
laatste wijziging: 12-47-2019