BobsCNC KL733 Perakitan - Halaman 10

Jelajahi secara online atau unduh pdf Perakitan untuk Sistem Kontrol BobsCNC KL733. BobsCNC KL733 20 halaman. X frame assembly
Juga untuk BobsCNC KL733: Manual (18 halaman), Panduan Perakitan (12 halaman), Panduan Memulai (9 halaman)

Halaman Cetak
BobsCNC KL733 Perakitan
With the X2 Mid Rail assembly on a large flat work surface set the
Step 4
third X2 Mid Rail beside it as shown.
NOTE: In the photo below the assembly is setting on the KL733 Optional Table.
Align slots of the X Frame Side Assembly with the X2 Mid Rail Supports as
shown. Carefully slide the slots down until the bottom of the slot rests on the
base of X Frame Side Assembly. The tabs on the X2 Mid Rail Supports will fit
in slots of the X Frame Side Assembly. Secure with three 5/16 x 1 1/4 Machine
Screws and Nuts.
Repeat to install the remaining X Frame Side Assembly on the opposite
side.
Slot
Tab
Page 10