BobsCNC KL744 Panduan Perakitan - Halaman 18

Jelajahi secara online atau unduh pdf Panduan Perakitan untuk Sistem Kontrol BobsCNC KL744. BobsCNC KL744 20 halaman. Table assembly
Juga untuk BobsCNC KL744: Memulai (9 halaman), Panduan Perakitan (12 halaman)

Halaman Cetak
BobsCNC KL744 Panduan Perakitan
On the Gantry Sides, using a 5/64 Allen Wrench, adjust the 8-32
Step 11
Set Screws to snug the lower pulley against the lower rail. Repeat
for all four lower Set Screws. The pulley should be full engaged
with the rail and only roll when the Gantry moves.
NOTE: Remember to apply Locktite 243 to the threads of the Set
Screws.
Page 18