Euro-Grille COKBBQEUGABR8 Panduan Pengguna - Halaman 12

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk panggangan Euro-Grille COKBBQEUGABR8. Euro-Grille COKBBQEUGABR8 18 halaman.

Natural Gas Conversion

CONVERSIONS ONLY TO BE DONE BY AUTHORIZED PERSON

Tools required

1. Socket head set screw driver (Included)

2. Wrench

Gas Piping

1. A minimum pipe with diameter 15mm is required for inlet piping. A lever operated shut‐off valve should be

installed with 1 meter of the appliance for serving the appliance.

2. Where is not practical to install solid tube AGA certified to AS/NZS 1869 class A, stainless steel brained hose could

be installed. This hose assembly must comply with AS5601 Gas installations, pipe sizing tables and shall not exceed 3

meters in length. The internal diameter of the hose must not be less than 10mm.

3. All gas pipe connection must be sealed with a gas pipe compound resistant to natural gas.

NOTE TO INSTALLERS

1. The U‐LPG injector is 0.98mm,

2. The NG injector for main burner is 1.50mm, for side and back burner is 1.65mm.

3. The BBQ is equipped with jets for both LPG and NG on.

4. The BBQ is set for U‐LPG by manufacturer.

5. Please follow following instructions to converse from LP to NG

* INSTRUCTIONS FOR CONVERTING THE MAIN BURNERS

1. Un crew and remove the rear panel pictured.