Euro-Pro SELECT EP923H Panduan Pemilik - Halaman 9

Jelajahi secara online atau unduh pdf Panduan Pemilik untuk Pembersih Uap Euro-Pro SELECT EP923H. Euro-Pro SELECT EP923H 11 halaman. Steam cleaner with soap dispenser 120v., 60 hz, 1550 watts

Halaman Cetak

OPERATING INSTRUCTIONS

Using the Soap Injector

Note: The soap solution should only be

used on surfaces that can withstand

the prolonged treatment with high

temperatures and moisture such as

ceramic tiles or counter tops. This

should not be used on materials such

as carpet or wood floors because the

high temperature and steam with soap

can damage the surface.

VERY IMPORTANT: Use only the soap

solution that has been supplied with

your steam cleaner. Use of any other

type of detergent soaps may damage the

pump mechanism and the feed system of

the injector. Regular detergent soaps

SHOULD NEVER BE USED with this

injector.

WARNING: KEEP SOAP

SOLUTION OUT OF THE

REACH OF CHILDREN.

CAUTION: DO NOT USE THE

SOAP SOLUTION ON ANY

FABRICS OR TEXTILES.

Attaching Soap Accessories to

Adapter

Your steam cleaner comes with a variety

of scrubbing pads, scrubbing sponges

and a soap brush that can only be used

with the soap accessory adapter.

To attach the soap brush to the

accessory adapter, push it into the soap

accessory adapter and turn it counter

clockwise. To lock the soap brush in

place, push the locking button down so

that the pin of the locking button goes into

one of the four (4) holes in the soap

brush. (Fig. 19) To remove the soap

brush, push the locking button up and

turn the brush clockwise to unlock.

(Fig. 20)

Locking

Locked

Button

Holes

Fig. 19

Fig. 20

Follow the same procedure as above to

attach the small or the large pad base to

the accessory adapter. Use the small pad

base when using the small scrubbing

pads or sponges or the large pad base

when using the larger scrubbing pads or

sponges. (Fig. 21)

To fix the scrubbing pads and sponges to

the pad bases, press firmly while twisting

slightly. (Fig. 22)

Fig. 21

Fig. 22

OPERATING INSTRUCTIONS

Care & Maintenance of the Steam

Pocket Towel

Due to the unique cleaning ability of this

cloth, proper care of your microfiber towel is

required to ensure long life and continued

cleaning ability.

• The first thing you should do when you get

a new microfiber towel is to wash and dry

it. During the manufacturing process the

fabric has a tendency to become flat as it

picks up contaminants from the air and

machinery. There will also be a number of

loose threads that, while they cause no

harm, can be annoying the first time you

use the towel.

• To clean the towel, simply wash it in your

washing machine using the warm water

setting.

• Always wash your towels separately from

other fabrics. They have a tendency to

pick up lint and other particles from other

fabrics and the next time you use your

towel, this lint will transfer to the surface

being cleaned.

• ONLY USE LIQUID DETERGENTS, never

use dry detergents as many times the

granules do not fully dissolve and become

trapped in the towel. This can scratch the

surface that you are cleaning.

• NEVER USE BLEACH OR FABRIC

SOFTENERS! Bleach will damage the

microfiber fabric and fabric softeners

deposit a coating on the microfiber fabric

what will not allow the cloth to clean

efficiently.

• Air dry the towel. Do not put in a clothes

dryer as high heat will cause the towel to

shrink and the microfibers to break down.

• If you wash your towel on a regular basis

and don't let them get too dirty, they will

last much longer. As with any fabric, dirt

particles, grease and other contaminants

can cause the fibers to break down,

therefore regular cleaning will help

preserve your microfiber towels.

• As you use the microfiber towel, you will

notice that sometimes a thread will loosen

or pull out. This is normal and you should

NEVER PULL AT THE LOOSE THREAD!

Pulling the thread can cause the weave to

come undone. Instead, simply trim the

thread with a pair of sharp scissors.

WARNING:

Always insure the

unit is "UNPLUGGED" from the

wall receptacle prior to attaching

or removing accessories.

Using Your Steam Cleaner with

the Triangular Brush

To attach the triangular brush to the

angle adapter, hold angle adapter in

your right hand and the brush in your

left. Insert the angle adapter into the

triangular brush and turn 180° to lock

in place. (Fig. 7 )

Fig. 7

Step 1: The triangle brush w/angle

adaptor connects either

directly to the handgrip or

may be used with the

extension tubes. To connect

the extension tubes to the

hand grip attach the

extension tubes one onto the

other and then onto the hand

grip. (Fig. 8 & 9) To

disconnect, reverse the

operation by pressing the

locking button and pulling the

two sections apart.

Fig. 8

Fig. 9