Euro-Pro EP171 Panduan Petunjuk Penggunaan dan Perawatan - Halaman 4

Jelajahi secara online atau unduh pdf Panduan Petunjuk Penggunaan dan Perawatan untuk Besi Euro-Pro EP171. Euro-Pro EP171 9 halaman. Compact performer 115/230 v., 60hz., 800 w.

Halaman Cetak

Shark Compact Performer

Model EP171

115/230 V., 60Hz., 800 W.

Main Components

1. Water Filling Inlet

2. Steam Control Dial

3. Spray/Burst of Steam Selector Button

4. Temperature Control Dial

5. Thermostat Light

6. Dual Voltage Switch

7. Spray Nozzle

8. Stainless Steel Soleplate

9. Water Measuring Beaker

TROUBLESHOOTING

PROBLEM

POSSIBLE REASONS & SOLUTIONS

• Make sure that the plug is securely in the socket.

Iron does not heat

• Temperature setting too low.

Turn to higher setting.

• This is normal.

Thermostat ready light

The light goes On and Off as the thermostat is

goes On and Off

switching the heating element On and Off to

maintain the selected temperature.

Some odor or small

• This is normal.

particles come out of

Follow instructions for first use and allow iron to steam

steam vents of new

through 2-3 fillings & press the steam burst button

iron

occasionally to eliminate small white particles.

Iron does not steam

• Water tank may be empty or water level is very low.

Add water.

• Make sure that the temperature control dial and

the steam control are correctly set. For

maximum steam, (setting 'Max' on steam control),

temperature control dial should be set on '•••'.

• Adjustable steam control is set on "0".

Always allow the iron to reach the selected

temperature with the adjustable steam control setting

at '0'. Make sure the temperature control dial is set in

the correct steam area, e.g. '•', and the steam control is

not on '0'. For more steam, turn temperature dial to

higher setting, e.g. '•••', and the steam control to 'Max'.

• If temperature setting and steam control setting are

correct and there is no steam, gently tap the

soleplate on the ironing board a few times. Move

the steam control from '0' to 'Max' a few times.

• Iron may not be hot enough. Set thermostat to the

Water droplets coming

'Max' position. Always allow iron sufficient time to

from steam vents

heat up (thermostat light goes off).

• Overuse of steam burst. Allow more time between

each burst.

• Iron may have been overfilled. Turn iron off,empty

water and follow instructions for filling.

• Steam performance may be low if iron requires

seasoning. To season, use regular tap water for 1or 2

tanks until steam performance improves.