Canon EOS 20D Digital Buku Petunjuk - Halaman 30

Jelajahi secara online atau unduh pdf Buku Petunjuk untuk Kamera Digital Canon EOS 20D Digital. Canon EOS 20D Digital 42 halaman. Canon eos 20d: instruction manual
Juga untuk Canon EOS 20D Digital: Buku Petunjuk (28 halaman), Buku Petunjuk (41 halaman), Buku Petunjuk (2 halaman)

Halaman Cetak

Sets the maximum and minimum shutter speeds to be used

P.Fn-04

Select the maximum and minimum shutter speeds from the list box.

For example, if you set 1/2000 sec. as the fastest shutter speed and 1/60 sec. as the

slowest, the shutter speed range will be 1/2000 to 1/60 sec.

This makes shutter speed selection faster and prevents a slow-speed sync. in aperture-

priority AE mode with the flash.

If you set the maximum and/or minimum shutter speed to one that is not a full-stop

increment (such as 1/750 sec.), the controllable and settable shutter speed range

might not be as exact as you set it (A slight deviation may occur.). This applies if you

also set Custom Function C.Fn-6-1 and C.Fn-6-2 and set the maximum and/or

minimum shutter speed to one that is not a full-stop increment (such as 1/3200 sec.).

To ensure that a proper flash sync speed is set in the Program AE mode, a shutter

speed range of 1/200 sec. to 1/80 sec. cannot be set with the EOS-1D Mark II N,

EOS-1Ds Mark II, EOS-1D Mark II and EOS-1Ds, and the range of 1/400 sec. to 1/80

sec. cannot be set with the EOS-1D.

If safety shift has been enabled (with C.Fn-16), it will override P.Fn-04's shutter

speed range.

Sets the maximum and minimum apertures to be used

P.Fn-05

Select the maximum and minimum apertures from the list box.

For example, if you set 1.4 for the largest aperture (minimum f/number) and 8.0 for the

smallest aperture (maximum f/number), the usable aperture range will be f/1.4 to f/8.0.

You can better control the apertures used by setting the range of usable apertures.

Specify a minimum aperture value that is smaller than the maximum aperture setting.

If you select a minimum aperture value that is larger than the maximum aperture, a

warning message appears and the setting reverts to the default value.

If you set the maximum and/or minimum aperture to one that is not a full-stop

increment (such as f/4.5), the controllable and settable aperture range might not be

as exact as you set it (A slight deviation may occur.). This applies if you also set

Custom Function C.Fn-6-1 or C.Fn-6-2 and set the maximum and/or minimum

aperture to one that is not a full-stop increment (such as f/6.3).

If the largest aperture of the attached lens is smaller than the largest aperture you set

with P.Fn-05, the largest aperture will be set to the lens' largest aperture. And if the

largest aperture of the attached lens is smaller than the smallest aperture you set with

P.Fn-05, the aperture will be set and fixed to the lens' largest aperture.

If safety shift has been enabled (with C.Fn-16), it will override P.Fn-05's aperture range.

Registers and switches the shooting mode and metering mode

P.Fn-06

Only while you press the <

> button, you can switch to the preset shooting mode,

exposure setting (such as the aperture for aperture-priority AE), metering mode, and

exposure compensation amount.

Select settings that are appropriate for each shooting mode.

The modes and settings are preset with the camera.

Convenient when you want to instantly select the preset modes and settings to suit a

particular shooting situation such as backlit or front-lit conditions.

Registering the Modes and Settings with the Camera

P.Fn-06

Set the shooting mode and shooting mode settings (for

example, aperture setting for aperture-priority AE mode). Then

set the metering mode and exposure compensation amount.

First press the <

> button, then press

the <

> button.

>appears in the LCD panel,

indicating that the modes and settings

have registered.

The registered modes and settings can

be modified any number of times.

To register the modes and settings, first press the <

button. If you press the <

> button first, the camera will only select the

registered modes and settings instead.

Bulb cannot be preset.

You cannot select the registered modes and settings during continuous shooting.

If P.Fn-03 has been set to specify the metering mode for manual exposure, and

P.Fn-06 is used to register the manual exposure mode and a metering mode

different from the one specified with P.Fn-03, you can select the metering mode

specified with P.Fn-03 by pressing the <

If P.Fn-04 and/or P.Fn-05 has been set, set the shutter speed and aperture within

the range specified with P.Fn-04 and/or P.Fn-05.

If the shooting and metering modes you want to set are excluded by the

restrictions in P.Fn-01 and P.Fn-02, those Personal Functions must be disabled.

For information on clearing and resetting Personal Functions, refer to "Clearing

and Resetting Personal Functions" in the camera's Instruction Manual supplied

with the camera.

Even if the shooting and metering modes selected by P.Fn-06 are excluded by the

restrictions in P.Fn-01 and P.Fn-02, they are still valid for P.Fn-06.

If C.Fn-4-1 or C.Fn-4-3 has been set, AF and AE will also take effect when you

press the <

> button.

When C.Fn-18 is set, P.Fn-06 is disabled.

> button before the <

> button.

3-10

Cover/Table of

Contents

Introduction

Downloading Images

from the Camera

Setting the Cameras

other than the EOS-1D

Series Cameras

Setting the EOS-1D

Series Cameras

Remote Shooting

Troubleshooting

Index