American Standard Lakeland Undercabinet Storage Rack 8193.140 Petunjuk Instalasi
Jelajahi secara online atau unduh pdf Petunjuk Instalasi untuk Perabotan Dalam Ruangan American Standard Lakeland Undercabinet Storage Rack 8193.140. American Standard Lakeland Undercabinet Storage Rack 8193.140 2 halaman. American standard lakeland undercabinet storage rack installation instructions
Halaman CetakLAKELAND™ UNDERCABINET STORAGE RACK
8193.140
Thank you for selecting American-Standard...the benchmark of fine quality
for over 100 years. To ensure that your installation proceeds smoothly--
please read these instructions carefully before you begin.
BEFORE YOU BEGIN:
• Carefully unpack your accessory, check the contents, and inspect carefully for damage.
• Mounting Kit Consists Of:
• 4 Clips
• 2 Long and 2 Short Metric Machine Screws
• 10 Flat and 4 Anti-shake (star) washers. Fig 4.
Note: The top of the rack is manufactured with a slope. When it is correctly installed under the sink the bottom
of the rack will be parallel with the rim of the sink.
IMPORTANT: DIMENSION OF FIXTURES ARE NOMINAL AND MAY VARY WITHIN PERMITTED MANUFACTURING TOLERANCES.
1
• Locate the fixing screw holes on the underside of the sink.
• Make sure the threads are clear and mark around them. Fig 1.
Fig.1
2
• Put two clips on each of the top thick wires.
• Gently squeeze them closed.
• The exact location of the clips may vary depending on whether you want to position your storage rack
to the left or right. Fig 2 & 3.
Fig.2
© A M E R I C A N S T A N D A R D I N C . 2 0 0 5
™
Installation
Instructions
Fixing Screw
Hole Locations
RECOMMENDED TOOLS & MATERIALS:
• Phillips Screwdriver
• Regular Screwdriver (Small)
• Masking Tape or Yellow Crayon
Fig.3
• Pliers
• Tape Measure
• Flash Light
7 9 1 4 0 7 - 1 0 0