Akuvox A01X Panduan Cepat - Halaman 4

Jelajahi secara online atau unduh pdf Panduan Cepat untuk Sistem interkom Akuvox A01X. Akuvox A01X 6 halaman.

Step2:Back Cover Installa on

For the convenience of the

installation, it is advised

that you lead the rope we

provided through the rope

hole at the back of the device,

then ﬁll in the grove using the

silicone foam strip.

Wire organizer

RJ45 Ethernet Patch Cable

RJ45 Coupler Ethernet

Extension Connector

RJ45 Cable with sleeve

Make all cables go through

the groove of the cable locking

plate, then hang the device

onto the junction box mounting

bracket while pushing it down

against the corresponding hook

hanger.

Insert RJ45 cable (with no sleeve attached) and press down the

terminal slot using the pry tool to secure all the signal wires in

their corresponding slot.

Note:

1.M ake sure that all the connection wires are organized under the

wire organizer.

2.I f the RJ45 extension cable is with a sleeve, then you

should insert RJ45 Ethernet patch cable instead and connect it to

the RJ45 coupler Ethernet connector before connecting the RJ45

cable (with sleeve) to the connector otherwise it can not be

properly sealed against the water.

Plug the rubber plug into the corresponding plug opening in the

direction as indicated.

Note: When there is only one Ethernet cable,you should select small

size rubber plug if the signal wire is less than 6 in quantity. Select

medium size rubber plug if the signal wire is 7-10 in quantity. Select

large rubber plug, if the signal wire is 11 or more in quantity.

Quick Guide

Hang the rope onto the

hook hanger on the

junction box.

Insert the cable locking

plate and tighten it using

4 M2.5x4 screws.

A01X/A02X