16XEIGHT SD2IEC evo2 Panduan Petunjuk Instalasi - Halaman 6

Jelajahi secara online atau unduh pdf Panduan Petunjuk Instalasi untuk Motherboard 16XEIGHT SD2IEC evo2. 16XEIGHT SD2IEC evo2 8 halaman.

Commissioning

2.1

Functional Test

First, a function test should be carried out to ensure that the SD2IEC has been properly

connected to the C64.

Place a FAT formatted SD card into the SD2IEC.

After the C64 has been switched on, at the flashing cursor type LOAD "$", 8 <return>

The contents of the SD card should be listed on the screen.

If an error message like ?DEVICE NOT PRESENT ERROR or ?FILE NOT FOUND ERROR

occurs, please read section 2.3 for fault isolation.

2.2

Setting the Real Time Clock

The following command can be used in direct mode to set the date and time for the real time

clock after initial commissioning or after changing the RTC battery:

OPEN 15,8,15, "T-WA <weekday> <month> <year> <hour> <minute> <second> <AM/PM>" + CHR $ (13): CLOSE 15

For the weekdays, please use the following notation:

SUN. - MON. - TUES - WED. - THUR - FRI. - SAT.

Example for Monday, 28/10/2013 at 10:30 clock in the morning:

OPEN 15,8,15, "T-Wamon. 10/28/13 10:30:00 AM "+ CHR $ (13): CLOSE 15

The commissioning of the SD2IEC is complete.

-6-