d2itsu APD-12CR Panduan Pengguna - Halaman 15

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Pendingin Udara d2itsu APD-12CR. d2itsu APD-12CR 20 halaman.

Foam steal

INSTALLATION INSTRUCTIONS (optional)

Foam seal A

(adhesive type)

Fig. 8

Without kit

Without stool

Fig. 9

Without kit

Without stool

Fig. 10

Fig. 11

Installation in a double-hung sash

window

1. Cut the foam seal(adhesive type) to the

proper length and

attach it to the window stool. Fig.8

2. Attach the window slider kit to the window

stool. Adjust the

length of the window slider kit according to the

width of window, shorten the adjustable window

kit if the width of window is less than 26.5

inches

Open the window sash and place the window

slider kit on the window stool. Fig.9

3. Cut the foam seal(adhesive type) to the

proper length and attach it on the top of the

window. Shown as in Fig.10

4. Close the window sash securely against the

window.

5. Cut the foam seal to an appropriate length

and seal the open gap between the top window

sash and outer window sash. Shown as in

Fig.11.