Don Park B-VENT BVS Petunjuk Instalasi

Jelajahi secara online atau unduh pdf Petunjuk Instalasi untuk Adaptor Don Park B-VENT BVS. Don Park B-VENT BVS 2 halaman.

N I V E R S A L

Installation Instructions

Engineered to be used in retrofit B-Vent to B-Vent chimney applications only. For use

with all approved type "B" gas vents listed with ULC/UL. Male/Female adaptors are

manufactured for use above or below the roof line.

½" Airspace Application

1. Slide adaptor over existing vent as far as it will go.

2. Locate draw band maximum of 1/2" from raw end of adaptor.

3. Install 2 #8 x 3/8" sheet metal screws (provided) through draw band and both outer

casings to ensure that there is no slippage. (NOTE: be sure not to tighten and puncture

the inner liner.)

4. Then silicone all exposed seams/joints using silicone with a temperature rating of 300

deg. F (150 deg. C) or more.

5. Continue retrofit with Don Park B-vent only.

B - V

E N T

O D E L

D A P T O R

B-Vent Model BVS Universal Adaptor. Revised Feb 7, 2011. V.1.0 DPBVUA

SHEET METAL & HVAC SUPPLIES

Head Office

2259 Markham Road

Scarborough, Ontario, Canada M1B 2W3

T. (416) 449-7275

www.donpark.com

BV S

(

B M U A

B F U A

For use with listed Don Park and

Energy Vent type B-vent

F. (416) 449-2614

)