American Standard Advanced Clean 3.0 SpaLet Panduan Instalasi - Halaman 6
Jelajahi secara online atau unduh pdf Panduan Instalasi untuk Toilet American Standard Advanced Clean 3.0 SpaLet. American Standard Advanced Clean 3.0 SpaLet 18 halaman. Bidet seat
Halaman Cetak
3. Installing This Product
Installation Requirements
Before installing this product, ensure that each of the following installation
requirements are met.
Contents
Remove the parts from the box and make sure all the parts in the parts list (below) are
present. Inspect the parts carefully to make sure they are in good condition.
If any part is damaged or missing, do not install this product. Contact the nearest customer
service representative for the part(s) you need.
The following parts are included:
• SpaLet
seat unit (with heated seat, seat lid and power cord)
®
• Mounting plate
• Manual set
• Mounting bolts, washers, and bushings (2 pieces each)
• Junction fitting (with a packing)
• SpaLet seat unit water supply hose (with 2 clips)
• Remote control
• Holder
• Batteries
• Wood screw
• Plastic anchors
SpaLet seat unit
(This plate attaches to the SpaLet seat unit.)
Manual set
Mounting plate
Mounting bolt
Washer
Mounting
bracket
Bushing
-6 - EN-
*Remote control unit and holder are
packed in the box.
Holder
Remote control unit
For remote control unit
Batteries (2) Wood screws
Clip
Clip
SpaLet
seat unit
water supply
hose
(37.40'' (950 mm) long)
Plastic anchors
Junction fitting
Packing
2 mm (0.08")
thick